Working principle of the manet valve
2015-01-06 by bridge
The valve is opened for the second pilot valve
magnet valve, its structure is dominated by the composition of the pilot valve and the magnet valve, the main valve with rubber seal structure.
Solenoid valve selection should first turn to follow the four principles of security, reliability, applicability, economy, followed by six according to site conditions (ie pipe parameters, fluid parameters, pressure parameters, electrical parameters, action, special requirements for selection).
The valve is opened for the second pilot valve magnet valve, its structure is dominated by the composition of the pilot valve and the main valve, the main
Gas Water Heater Valve with rubber seal structure. Regular position, the movable core sealed pilot valve orifice, pressure balance valve chamber, the main valve port closed. When the coil is energized, the electromagnetic force on the active core pull, the main magnet valve cavity media self-guided valve port leakage, as well as a pressure difference, diaphragm or valve cup was quickly lifted, opening the main valve to open, the valve was then pathway of. When the coil is de-energized, the magnetic field disappears, the movable core is reset, the pilot valve closed mouth, after the pilot valve and the main magnet valve chamber pressure balance valve was closed again.