Burner gas stove technical operations
1, first lit the fire, until the fire lit stable, said the examination of the main conduit gas supply pressure is in the normal range.
2, the fan starts blowing into the pre-stage, check to make sure the device is in the normal state.
3, observe the gas and air pressure indicator, confirm the instruction given by the burner operating permit.
4. Press combustion control combustion control buttons on the control panel, then start the process of combustion into the combustion controller.
5. female fire ignition Ming took the task has been completed. Operators should be close female fire button panel, cut off the mother retained fire burning fire.
6, the fire burning process operator can always adjust the fire according to process requirements (load) in size. When the process requirements need short off the fire, the operator should open the parent to retain female fire ignition switch and turn off the fire switch.
7, adjust the stove top burner valve, gas stove safety valve operating handle, phase adjustment, indeed burner load output meet the technical requirements.
8, stop operation: temporary shutdown, first turn off the fire, and then switch off the combustion control, and finally close the stop button.